Global Positioning System or GPS has been included in earthmoving industries for a certain time already. The heavy equipment manufacturers applied this technology on various procedures. These procedures are land grading, causeways, roads, levees, railway beds, canals, and berms.
A lot of modification and advances in technology, as well as innovation and efficiency with the lesser profit involved, pushed certain kinds of developments. One of these developments is the use of GPS machine control files that are being adapted into earthwork. It can reduce the cost for contractors and would make work faster with the use of these technologies.
By the end of the 1990s, leading heavy equipment corporations have been applying this innovation and dominated the market sector for this technology while advancing it even further. The system works by simply comparing the position of the current location with the blade of the graders. It indicates the difference while being able to adjust them automatically. The GPS then comes into place for this procedure.
A lot of 3D and 2D software are now developed to assist this procedure. The model of the topography is then imported and visualized in these 3D and 2D programs for the operator to conveniently study the area even further. Many companies are developing software of their own while also upgrading and improving them after each revision to provide better accuracy.
Two types of system are being utilized for the earthmoving procedure in heavy equipment industries. They can be distinguished as either Fully Automatic or Indicate Only. The two of them are systems that can either use one or two receivers. With only one receiver, the guidance system is very limited on the position of the machine. But with two receivers, it allows two points which can also give the angle as well.
Having an accurate topographic map and design would fully utilize the GPS capabilities and give accurate results. These files are most likely from an engineering firm and then can be converted to the display for GPS. A few guidance systems has the capability to define the elevation and angle of the grade, too.
The heavy equipment that can be installed with guidance systems are as follows. Motor Graders, Scrapers, Hydraulic Excavators, and Compactors. Having that installed would make the machines more efficient and productive in terms of accuracy and cost effectiveness. Having this can give less manpower or on site workers.
For one machine it has a cost of about one hundred million dollars. If used efficiently, it can be thirty percent more productive than the traditional methods. Due to the high accuracy, there is less materials that are needed and cost. That is why most construction projects have GPS as a requirement in order to lessen the cost.
The limitation is only due to obstructions of the signals and including the surrounding environment as well. Considering the location and environment of the production site should be done in order to have the guidance system to work at its best. Nearby buildings and their roofs can obstruct the signals from the satellite and can make dead zones. Even so, Global Positioning System is still used in advanced Earthmoving due to its advantages and efficiency.
A lot of modification and advances in technology, as well as innovation and efficiency with the lesser profit involved, pushed certain kinds of developments. One of these developments is the use of GPS machine control files that are being adapted into earthwork. It can reduce the cost for contractors and would make work faster with the use of these technologies.
By the end of the 1990s, leading heavy equipment corporations have been applying this innovation and dominated the market sector for this technology while advancing it even further. The system works by simply comparing the position of the current location with the blade of the graders. It indicates the difference while being able to adjust them automatically. The GPS then comes into place for this procedure.
A lot of 3D and 2D software are now developed to assist this procedure. The model of the topography is then imported and visualized in these 3D and 2D programs for the operator to conveniently study the area even further. Many companies are developing software of their own while also upgrading and improving them after each revision to provide better accuracy.
Two types of system are being utilized for the earthmoving procedure in heavy equipment industries. They can be distinguished as either Fully Automatic or Indicate Only. The two of them are systems that can either use one or two receivers. With only one receiver, the guidance system is very limited on the position of the machine. But with two receivers, it allows two points which can also give the angle as well.
Having an accurate topographic map and design would fully utilize the GPS capabilities and give accurate results. These files are most likely from an engineering firm and then can be converted to the display for GPS. A few guidance systems has the capability to define the elevation and angle of the grade, too.
The heavy equipment that can be installed with guidance systems are as follows. Motor Graders, Scrapers, Hydraulic Excavators, and Compactors. Having that installed would make the machines more efficient and productive in terms of accuracy and cost effectiveness. Having this can give less manpower or on site workers.
For one machine it has a cost of about one hundred million dollars. If used efficiently, it can be thirty percent more productive than the traditional methods. Due to the high accuracy, there is less materials that are needed and cost. That is why most construction projects have GPS as a requirement in order to lessen the cost.
The limitation is only due to obstructions of the signals and including the surrounding environment as well. Considering the location and environment of the production site should be done in order to have the guidance system to work at its best. Nearby buildings and their roofs can obstruct the signals from the satellite and can make dead zones. Even so, Global Positioning System is still used in advanced Earthmoving due to its advantages and efficiency.
About the Author:
When you are looking for information about GPS machine control files, you can pay a visit to the web pages online here today. Details are available at http://www.jsdigitaldesign.com now.
No comments:
Post a Comment