Thursday, March 29, 2018

To Find Experts In Powder Coating Denver Is The Best Location To Check Out

By Christopher Fisher


One of the techniques currently used in applying finishes on surfaces and objects is powder coating. This technique is different from traditional painting methods which use liquid paint to create a finish. Rather, it uses dry powder. Powder coating is way more complicated the painting. Moreover, it requires specialized equipment and skills. Regardless of this, the steps that are followed are the same. When one needs powder coating Denver offers the perfect location to visit.

The first step in this process is to prepare the surface by removing cleaning it and smoothening it if necessary. The second process involves the actual application of the powder. Lastly, the powder applied is cured in place to form the final finish. The curing process is done inside a special equipment referred to as an oven. Curing requires heat for it to occur. The heat must be applied and maintained consistent in the oven at all times during curing.

The outcome of the finish attained finally is normally very smooth, consistent, and durable. Moreover, by using this method, there is possibility that one can attain several varying special effects. Dormant, fine, translucent, wrinkle, river vein, and multi-component are some of the special effects that could be attained. All the above mentioned effects have unique looks and a certain process of achieving it.

To achieve the wrinkle effect, polyester, epoxy or urethane chemistry must be done. This effect in very hard to attain and novices normally have rough time working with it. Fortunately, a person can finally get it better and become perfect through practicing on sample surfaces. Novices usually encounter problems in two major stages. The two are the curing process and the application of the substrate.

Before begin the process, individuals need to ensure that the surface is well cleaned and dried. It is vital to have consistency during the cleaning so that all corners of the surface are cleaned properly and dried. This helps to avoid the sports to form in the final finish. Uniform temperatures need to be maintained in the oven when curing is taking place. The finish is ruined when some sections in an oven hotter than others.

Translucent finish comes with a wide range of colors. Translucent finishes apply powder on surfaces but still allow some light to pass through. This offers beauty that is loved and preferred by many customers. The translucent effect can be achieved through chemistries of urethane or polyester. Polyester finishes are less smooth in the exterior achieved and they tend to have limited durability too compared to urethane. Urethanes tend to be stickier but they offer better flow and appearance in general.

There also exists a major limitation that comes with translucent finish. The limitation is that it is very easier to attain uneven pigmentation as a final finish. Unevenness occurs in the pigmentation at most when objects are irregularly shaped. The thickness that varies to a maximum of a millimeter is visible. One can possibly use a base coat just like undercoats are applied in conventional liquid painting.

Base coats help in achieving uniformity, especially if the coloring of the surface is not uniform. Translucent finishes are hugely preferred because they tend to offer impressive brightness that surpass most other finishes. This brightness works well on stainless steel surfaces.




About the Author:



No comments:

Post a Comment