Wednesday, May 23, 2018

Measures To Consider When Handling Asbestos Chicago

By Raymond Walker


Asbestos is of importance to manufacturing and construction works. This is because they help in fireproofing and in insulating among other uses. Apart from being of use, they pose health problems such as cancer when people are exposed to them for longer periods of time. To minimize these health risks then, the following safety tips need to be observed when handling Asbestos Chicago.

The most important safety tip is to ensure you wear a respirator when working in sites that are suspected to contain asbestos. This will prevent inhaling the harmful dust to the lungs with will cause health problems that are related to the lungs later. Also, people are advised to use appropriate footwear and gloves to avoid contact with the noncombustible material in any part of their bodies.

Of another importance is to avoid working on the surfaces that are dry. This because there are great chances that the loose particles will not miss being attached to the bodies of the constructors. At the same time, the dust can be inhaled. To avoid this, the working areas must be watered to ensure that the particles are compacted hence prevent their spread.

It is considered unwise to use water jets with high pressure to wet the surface that is covered with the noncombustible material. This is because the high pressure will scatter the loose debris to a large surface hence increasing the risk of people getting into contact with them. On the same note, tools that are too powerful should not be used to handle asbestos as this will increase the amount of dust released into the atmosphere.

When the work is done, workers should ensure they clean themselves thoroughly to ensure that no particles from the alabaster are in contact with their bodies. On the same note, the workers should dispose the clothes that they use after work properly. This is because the clothes still contain the dust from the working area and if one gets into contact, this may lead to health problems.

In cases where the work is conducted in open grounds away from homes, the construction managers should alert the people from neighboring community about the same. They should then be required to ensure that any opening leading to their houses are closed. This will prevent the dust that may be produced from your working site from entering their houses since they cause respiratory problems.

When working indoors, it is wise to isolate the area you are working on from other areas. This should be done by the closing of the internal doors until the work is finished. To ensure that it is free and enough air flow to the place of work the external doors and windows must be left open to facilitate that. The floor should also be covered by the heavy plastic sheet to catch debris and offcuts.

After finishing the work, Make sure that any noncombustible cement residue in the work area and on the tools and equipment that were used are cleaned. For efficiency, this should be done using the wet rags and mops. Further still vacuum cleaners with high heat efficiency particulate air should be used. The workers should avoid contact with the equipment that cannot be cleaned such as brushes.




About the Author:



No comments:

Post a Comment