This is a method of abrasive blasting that utilizes carbon dioxide to clean a surface. Dry ice is a form of carbon dioxide that is solidified. The process is accelerated in a pressurized air stream using a pump that is directed in to a surface that needs cleaning. It is a safe and environmentally friendly method since it does not contain any chemicals that can be harmful to the persons doing the process. Today, many businesses offer Dry Ice Blasting Services.
The dry ice is smashed into pellets which are sprayed under high speed on a surface. The ice pellets used are soft so they create minimum abrasion to surfaces where they hit. This is why they are more preferred as compared to other abrasive materials like sand. As the pellets hit the surface heat is generated which results in the sublimation of the pellets.
Sublimation is very important as through this, a lot of heat is absorbed and results in shear stress. Shear stress also helps in the cleaning of the surface. This is because there will be more underlying heat than that on the surface, making the dirt to be easily removed. Therefore, this process is best suited for surfaces that are good heat conductors.
The procedures used in dry ice blasting are mainly single-hose and two-hose blasting. The two-horse method involves the use of different hose pipes to deliver the compressed air and the dry ice pellets. They are sucked by the use of the scheme effect. On the other hand the single-hose blasting entails the use of only one hose pipe in the delivery of the compressed air and the pellets. This type is more efficient as compared to the two-hose procedure.
The single-hose systems provide more aggressive cleaning hence they can clean up heavier dirt layers and faster cleaning. They can also use longer hose compared to the two hose without a drop in the pressure at any point. Single-hose has a feature that enables them to make use of a quickly cycling air lock. This helps in prevention of potential dangers associated with the blasting.
Decontaminating of surfaces and cleaning of food processing equipment can be done using this method. Microorganisms found on decontaminated surfaces that are undetectable through simple conventional methods can be detected by using dry ice method. Fire related hazards cannot be caused when cleaning the surface hence the method is said to be safe. Different kinds of solvent-based cleaning products can use this method. Aero industries use this method to clean surfaces. One of the reasons this method is preferred is because it does not leave residues.
Dry ice blasting uses a combination of forces that enables a surface to be cleaned without any damage. It does not leave any residue since it utilizes the sublimation principle hence no harmful secondary waste is left behind.
It is vital to consider safety precautions during the process as carbon dioxide can be very dangerous. Carbon dioxide can displace oxygen if the basting is done in a poorly ventilated room and this can result in choking or even death. To avoid this, blasting should be done in well ventilated rooms and those working in such places should put on protective clothing.
The dry ice is smashed into pellets which are sprayed under high speed on a surface. The ice pellets used are soft so they create minimum abrasion to surfaces where they hit. This is why they are more preferred as compared to other abrasive materials like sand. As the pellets hit the surface heat is generated which results in the sublimation of the pellets.
Sublimation is very important as through this, a lot of heat is absorbed and results in shear stress. Shear stress also helps in the cleaning of the surface. This is because there will be more underlying heat than that on the surface, making the dirt to be easily removed. Therefore, this process is best suited for surfaces that are good heat conductors.
The procedures used in dry ice blasting are mainly single-hose and two-hose blasting. The two-horse method involves the use of different hose pipes to deliver the compressed air and the dry ice pellets. They are sucked by the use of the scheme effect. On the other hand the single-hose blasting entails the use of only one hose pipe in the delivery of the compressed air and the pellets. This type is more efficient as compared to the two-hose procedure.
The single-hose systems provide more aggressive cleaning hence they can clean up heavier dirt layers and faster cleaning. They can also use longer hose compared to the two hose without a drop in the pressure at any point. Single-hose has a feature that enables them to make use of a quickly cycling air lock. This helps in prevention of potential dangers associated with the blasting.
Decontaminating of surfaces and cleaning of food processing equipment can be done using this method. Microorganisms found on decontaminated surfaces that are undetectable through simple conventional methods can be detected by using dry ice method. Fire related hazards cannot be caused when cleaning the surface hence the method is said to be safe. Different kinds of solvent-based cleaning products can use this method. Aero industries use this method to clean surfaces. One of the reasons this method is preferred is because it does not leave residues.
Dry ice blasting uses a combination of forces that enables a surface to be cleaned without any damage. It does not leave any residue since it utilizes the sublimation principle hence no harmful secondary waste is left behind.
It is vital to consider safety precautions during the process as carbon dioxide can be very dangerous. Carbon dioxide can displace oxygen if the basting is done in a poorly ventilated room and this can result in choking or even death. To avoid this, blasting should be done in well ventilated rooms and those working in such places should put on protective clothing.
About the Author:
When you are looking for information about dry ice blasting services, come to our web pages today. More details are available at http://www.asmenvironmental.com/dry-ice-blasting now.
No comments:
Post a Comment